Batteries demand lots of caution when you work around them or move them. They are very heavy, store enough energy to start a fire, are full of dangerous sulfuric acid, and emit explosive hydrogen gas. Fun stuff, eh? Here are some safety tips for working with your batteries. Note: These safety precautions are for standard lead-acid batteries, since nickel-cadmium batteries use a base--potassium hydroxide--instead of sulfuric acid for an electrolyte. Follow the manufacturers instructions instead of these with your NiCad batteries.
- Install your batteries in a vented battery box, they emit hydrogen gas when charging
- Never install electrical equipment in the same compartment as batteries due to explosive hydrogen gas
- No smoking around batteries for the same reason
- Wrap wrench handles in electrical tape to avoid shorting between battery terminals. A 6-volt golf cart battery can turn a wrench red hot in seconds
- Wear goggles and rubber gloves to protect yourself from sulfuric acid when moving or working on batteries
- Keep a box of baking soda and a jug of water around to neutralize any spilled battery acid
- If you get acid on your skin, flush with lots of water
- In case of acid in your eyes, flush with water for 15 minutes and call a doctor
- Make sure someone else is around when you work on or move batteries